Synpol Products - synthetic resins manufacturer, synthetic resins suppliers, synthetic resins, amino resins manufacturer, amino resins suppliers, resins, butylated urea formaldehyde resin, butylated melamine formaldehyde resin, butylated benzoguanamine formaldehyde resin, isobutylated urea formaldehyde resin, isobutylated melamine formaldehyde resin, polyamide resins manufacturer, polyamide resins suppliers, polyamide resins, reactive polyamide resins, polyamide adduct, polyaminoamide, non reactive polyamide resins, epoxy resins manufacturer, epoxy resins supplier, epoxy resins, epoxy esters, reactive epoxy diluents, phenyl glycidyl Ether, butyl glycidyl ether, cresyl glycidyl ether,

	Home \| Profile \| Quality \| Clientele \| R & D \| FAQs \| Feedback \| Contact Us \| Location \| E-mail \| Site Map

Amino Resins
.....................................................

Polyamide Resins
.....................................................

Alkyd Resins
.....................................................

Hardeners and Accelerators
.....................................................

Polyvinyl Butyral Resins
.....................................................

Acrylic Resins
.....................................................

Phenol Formaldehyde Resins
.....................................................

Ketone Formaldehyde Resins
.....................................................

Epoxy Resins, Epoxy Esters
and Reacitve Diluents
.....................................................

04 HARDENERS AND ACCELERTORS

04 . 16 .

Type	:	Accelerator (Teritary amine)
Viscosity in Supply at 25°C in Poises	:	2 - 5
Density g/CM³	:	0.9 - 1.0
Mixing ratio with 100 parts of
SYNPOL 200	:	5 - 10
SYNPOL 450 XX	:	---
Cure conditions	:	16 - 24 hours at 25 ⁰
Notes	:	As accelerator with polyamide & anhydride curing agents & as hardener for casting, laminating & Adhesive applications.

04 . 17 .

Type	:	Cycloaliphatic amine epoxy adduct
Viscosity in Supply at 25°C in Poises	:	3 - 5
Density g/CM³	:	1.02 - 1.03
Mixing ratio with 100 parts of
SYNPOL 200	:	45 - 55
SYNPOL 450 XX	:	---
Cure conditions	:	16 - 24 hours at 25 ⁰
Notes	:	Decorative colour stable, self levelling flloring system, trowelling compounds giving excellent adhesion, low shrinkage, high chemical & mechanical resistance. Very useful for flooring in factories, dairies, food factories, meat packing plants and ware houses.

04 . 18 .

Type	:	Phenyl alkamine
Viscosity in Supply at 25°C in Poises	:	20 - 40
Density g/CM³	:	0.98 - 1.0
Mixing ratio with 100 parts of
SYNPOL 200	:	40 - 60
SYNPOL 450 XX	:	12 - 18
Cure conditions	:	16 - 24 hours at 25 ⁰
Notes	:	Solvent free or high solids epoxy coatings, curing in presence of moisture at low ambient temperature, non-critical mixing ratio for heavy duty maintenance & marine coatings, It offers very good handling properties, fast cure rates, along with low viscosity, superior chemical resistance & adequate flexibility.

04 . 19 .

Type	:	Accelerated polyamide epoxy adductt
Viscosity in Supply at 25°C in Poises.	:	20 - 50
Density g/CM³	:	1.01 - 1.03
Amine Value mg. KOH/g.	:	210 - 230
Mixing ratio with 100 parts of
SYNPOL 200	:	70 - 100
SYNPOL 450 XX	:	--
Cure conditions	:	16 - 24 hours at 25 ⁰
Notes	:	Low viscosity, non-critical mixing ratio, resistance to blush & exudation, exellent flexibility & impact resistance. Useful for solvent free anticorrosive coatings, grouting & floor topping systems, high solids coatings, adhesives, putties, sealants & flexible cable jointing compounds.

04 . 20 .

Type	:	Aliphatic amine adduct
Viscosity in Supply at 25°C in Poises.	:	100 - 140
Density g/CM³	:	1.10 - 1.12
Mixing ratio with 100 parts of
SYNPOL 200	:	18 - 22
SYNPOL 450 XX	:	--
Cure conditions	:	16 - 24 hours at 25 ⁰
Notes	:	Fast setting adhesives, potting compounds, & electrotechnical applications. It bonds metals, ceramics, vulcanised rubber, rigid plastics, etc. Useful as polymer welding for electrical & electronic circuits for fastening lead terminals & components to resist mechanical vibrations.