Home  |  Profile  |  Quality  |  Clientele  |  R & D  |  FAQs  |  Feedback  |  Contact Us  |  Location  | E-mail  | Site Map

Amino Resins .....................................................     Polyamide Resins .....................................................     Alkyd Resins .....................................................     Hardeners and Accelerators .....................................................     Polyvinyl Butyral Resins .....................................................     Acrylic Resins .....................................................     Phenol Formaldehyde Resins .....................................................     Ketone Formaldehyde Resins .....................................................     Epoxy Resins, Epoxy Esters and Reacitve Diluents .....................................................       04 HARDENERS AND ACCELERTORS 04 . 01 HARDENERS 111 Type : Aliphatic Polyamine Viscosity in Supply at at 25°C in Cps. : 15- 25 Density g/CM³ : 0.98 - 0.99 Amine Value mg. KOH/g. : 2250 Approx Amine eq. wt. : 25 Mixing ratio with 100 parts of SYNPOL 200 : 10 - 14 SYNPOL 450 XX : 5 - 7 Cure conditions : 16 - 24 hours at 25 0 Notes : Electrical potting, encapsulation, casting, hand lay-up lamination & tooling, flooring surfacing & adhesives. Coal tar modified surface coatings. 04 . 02 HARDENERS 222 Type : Aliphatic Polyamine Viscosity in Supply at at 25°C in Cps. : 7 - 10 Density g/CM³ : 0.95 - 0.96 Amine Value mg. KOH/g. : 2650 Approx Amine eq. wt. : 21 Mixing ratio with 100 parts of SYNPOL 200 : 8 - 12 SYNPOL 450 XX : 4 - 6 Cure conditions : 16 - 24 hours at 25 0 Notes : Electrical potting, encapsulation, casting, hand lay-up lamination & tooling, flooring surfacing & adhesives. Coal tar modified surface coatings. 04 . 03 . HARDENERS 240 Type : Modified aliphatic polyamine Viscosity in Supply at at 25°C in Cps. : 2 - 5 Density g/CM³ : 1.01 - 1.05 Amine Value mg. KOH/g. : 725 - 800 Amine eq. wt. : 40 Mixing ratio with 100 parts of SYNPOL 200 : 20 - 22 SYNPOL 450 XX : -- Cure conditions : 16 - 24 hours at 25 0 Notes : Safe hardener for casting, potting, lamination, tooling, adhesives with short pot life & fast curing properties. 04 . 04 . HARDENERS 260 Type : Modified aliphatic polyamine Viscosity in Supply at at 25°C in Cps. : 75 - 80 Density g/CM³ : 1.0 - 1.1 Amine Value mg. KOH/g. : 675 - 775 Amine eq. wt. : 44 Mixing ratio with 100 parts of SYNPOL 200 : 22 - 24 SYNPOL 450 XX : -- Cure conditions : 16 - 24 hours at 25 0 Notes : Solvent free epoxy coatings, castings, sealing & laminating. Very good wetting propertise of glass fiber in laminating applications.. 04 . 05 . HARDENERS 280 Type : Modified aliphatic polyamine Viscosity in Supply at at 25°C in Cps. : 20 - 30 Density g/CM³ : 1.14 - 1.16 Amine Value mg. KOH/g. : 450 - 500 Amine eq. wt. : 62 Mixing ratio with 100 parts of SYNPOL 200 : 30 - 35 SYNPOL 450 XX : -- Cure conditions : 16 - 24 hours at 25 0 Notes : High reactivity through built-in accelerator, immunity against carbon dioxide & low water miscibility of hardener component, suits for applications under high humidity, even under water and temperature upto 5 0. NEXT Go to Products Page

@2009 Copyright.synpolproducts.com all right.reserved Home   Profile   Products   Quality   R & D   Clientele   Contact Us   Feedback   FAQs  Location   E-mail   Site Map   Powered by : SEO By : googletoprankingseo.com